|
= |
Hawa
Pressure Seal Gate Valves have been
designed to meet the re q u i rements of
API 600 - ISO 10434 / BS 1414 / API 6D-ISO
14313 /ASME B 16.34 |
|
= |
Face to Face
and End to End dimensions conform to ASME
B 16.10 / ISO 5752 / BS 2080 / DIN |
|
= |
End flange
dimensions conform to ASME B 16.5 / ISO
7005-1 / API 605 / BS 3293 / DIN |
|
= |
Butt weld end dimensions conform to ASME B 16.25 |
|
= |
The stem nut
design allows for the removal of the
hand-wheel while keeping the Stem and Gate
in a fixed position. |
|
= |
Anti-frictional Ball bearings are provided
for ease of operation. |
|
= |
The strength
of Stem to Gate connection is stronger
than the strength of the Stem at the root
of the operating thread |
|
= |
Outside
screw and yoke construction |
|
= |
All the
valves provided with backseat arrangement
duly satellite faced |
|
= |
Bi-directional shut-off |
|
= |
The gland is
of self aligning two piece type |
|
= |
Deep
stuffing box |
|
= |
Body ports
are streamlined, permitting unobstructed
flow, reduces turbulence, results in lower
pressure drop & lower erosion |
|
= |
The securely
welded Seat-rings are satellite faced
cylindrical bottom seated type having
ample cross section for strength |
|
= |
The gasket
design ensures self sealing under pressure |
|
= |
The inner
row of studs establish the initial seal of
the Pressure seal joint |
|
|
Valves meet
the requirements of fugitive emission
levels Shell category B as per MESC SPE
77/312 |
| |
